FilterFAB 200 is a polyvinyl acetate emulsion adhesive that can be used in temperature as low as 35 degrees Fahrenheit and allows for short (if any) clamp time.

FilterFAB 210 FS


FilterFAB 210 FS (Fast Set) is a cost-effective, water-based polyvinyl acetate emulsion adhesive developed for cardboard-framed air filter assembly applications. It features the quickest set time for high speed operations within the FilterFAB line, while exhibiting high initial tack and strong bonds. FilterFAB 210 FS is formulated to work well with equipment typically found in the industry, and provides excellent adhesion to a variety of media.





  • Fast setting for high speed filter assembly prior to insertion into retaining fixtures or belts
  • Higher initial tack than the competition - allows for quick and easy assembly with less handling time
  • Exhibits stronger bond strength than many competitive filter adhesives
  • Establishes strong bonds of the cardboard die-cut areas to the media’s pleat peaks
  • Excellent spreader stability
  • Appropriate fold over adhesion - no visible delamination
  • Easy clean-up with water
  • No adhesive build-up on clamping equipment or gloves
  • Excellent water resistance
  • Formaldehyde-free




Spread: The recommended spread is 8-11 g/ft² for most applications but should be verified with in-plant trials.  Higher spreads will frequently result in slower setting rates and warping of the cardboard stock.  

Assembly time:
Assembly time can vary greatly depending on the environmental conditions and glue spread. It is recommended that the filter be assembled in less than a minute.

Clean-up: For easy removal of adhesive from equipment, clean-up should be done while the adhesive is still wet with water (this includes the glue roller and pans).


Shelf life: Best if used within six months of date of manufacture. Please store in closed containers. Protect from freezing; product is not freeze-thaw stable.  For additional questions, Franklin’s technical service team is available at 1.800.877.4583. 24/7 technical service is available online at



The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found
at (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
© Copyright 2018. All rights reserved. Franklin International. Revised 02/21/18.