FilterFAB 300 is a vinyl acetate ethylene copolymer emulsion adhesive that generates fast initial tack and high tensile strength.

FilterFAB 300

PRODUCT DESCRIPTION

FilterFAB 300 is a high performance, water-based vinyl acetate ethylene copolymer emulsion adhesive designed for use in the assembly of air filters. The adhesive generates fast initial tack and high tensile strength.

 

PHYSICAL PROPERTIES

 

KEY PRODUCT FEATURES

• Adhesive sets almost immediately with some repositionability
• Exhibits stronger bond strength than many competitive filter adhesives
• Formaldehyde-free adhesive
• High performance adhesive with fast initial tack and high tensile strength
• Easy cleanup 

 

APPLICATION GUIDELINES

Spread: The recommended spread is 8-10 g/ft² for most applications but should be verified with in-plant trials. Higher spreads will frequently result in slower setting rates and warping of the cardboard stock.

Assembly time: Assembly time can vary greatly depending on the environmental conditions and glue spread. It is recommended that the filter be assembled within two minutes.

Clean-up: For easy removal of adhesive from equipment, clean up while it is still wet with warm water (this includes the glue roller and pans). For dried glue, steam and or hot water are the most effective. Using glue release agents on equipment will also allow for easier clean up. 

 

STORAGE AND HANDLING

Shelf life: Best if used within six months of date of manufacture. Mix before use. Product is not freeze thaw stable. Frozen product will have a separated and or lumpy appearance.

For additional questions, Franklin’s technical service team is available at 1.800.877.4583. 24/7 technical service is available online at www.franklinadhesivesandpolymers.com.

 

IMPORTANT NOTICE TO CUSTOMER:
The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer should determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at http://www.franklini.com/Terms_and_Conditions.aspx (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
©ï€ Copyright 2012. All rights reserved. Franklin International. Revised 10/12/12.