Covinax 320-10

PRODUCT DESCRIPTION

Covinax 320-10 is an APE- free, formaldehyde-free high performance copolymer, specifically designed for optically clear solvent and moisture resistant removable pressure sensitive applications. This product has been formulated to adhere to multiple substrates. It provides smooth and clean removability with no adhesive transfer or ghosting after extended heat aging on high energy surfaces specifically glass and stainless steel. It is best suited for a variety of markets, from labels and window graphics to specialty tapes. Covinax 320-10 has a good balance of peel and tack adhesion and offers excellent cohesive strength. This product will remain optically clear when exposed to UV. Covinax 320-10 can be repositioned multiple times without losing adhesion and is suitable for re-seal applications where FDA compliance is NOT required.


PHYSICAL PROPERTIES

Polymer Type: Styrene-acrylic Copolymer
Protective System: Blended Anionic/Nonionic Surfactants
Color: White
Viscosity (cps): 800 - 1200 (RVF, Spindle #4/100 RPM/77°F)
Percent Solids (%): 47.0 - 53.0
pH: 6.0 - 7.2
Weight per Gallon: 8.4 lb 
Glass Transition Temperature (Tg): (DSC): -37.3°C


PERFORMANCE PROPERTIES

A 1.0 mil (28g/m2) dry film of Covinax 320-10 DEV cast directly onto 1 mil thickness polyester film will exhibit the following average performance properties when tested on #304 stainless steel, which has a #3 surface finish.

Minimum Application Temperature:          >32°F                                             N/A
Service (Use) Temperature:                   20°F to 250°F                                     N/A

NOTE: Minimum application and service temperatures are dependent upon many factors including face stock, adhesive coat weight, adhesion, and intended application. We can only offer an estimate based on the Tg and typical performance properties of the adhesive.

FDA Compliance: None 
 


STORAGE AND HANDLING

Shelf life: Best if used within three months of date of manufacture. Mix before use for best results. Product is not freeze/thaw stable.

For additional questions, Franklin’s technical service team is available at 1.800.877.4583. 24/7 technical service is available online at
www.franklinadhesivesandpolymers.com.
 

 
IMPORTANT NOTICE TO CUSTOMER:
The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at
http://www.franklini.com/Terms_and_Conditions.aspx. (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
© Copyright 2022. All rights reserved. Franklin International. Revised 06/08/2022.