Covinax 211-02

PRODUCT DESCRIPTION

Covinax 211-02 is a surfactant stabilized acrylic copolymer emulsion developed for use as a removable pressure sensitive adhesive for use with vinyl film stocks. It will perform well as a removable adhesive from most surfaces, including glass, metal and plastics, exhibiting smooth non-tearing adhesion and maintains very constant peel adhesion even after extended aging.


PHYSICAL PROPERTIES

Polymer Type: Acrylic
Protective System: Anionic
Color: White
Viscosity (cps): 250 - 650 (RVF, Spindle #3/50 RPM/77°F)
Percent Solids (%): 55.5 - 58.0
pH: 4.9 - 6.9
Weight Per Gallon: 8.4
Borax Compatible: Yes
Glass Transition Temperature (Tg): (DSC): -55.1°C



PERFORMANCE PROPERTIES

A 1 mil (28g/m2) dry film of Covinax 211-02 cast directly onto 1 mil thickness polyester film will exhibit the following average performance properties when tested on #304 stainless steel, which has a #3 surface finish.

 

Minimum Application Temperature:                    >32°F                                        N/A
Service (Use) Temperature:                             20°F to 250°F                                N/A

NOTE: Minimum application and service temperatures are dependent upon many factors including face stock, adhesive coat weight, adhesion, and intended application. We can only offer an estimate based on the Tg and typical performance properties of the adhesive.

 

ASTM F963-03 Compliance: Standard Consumer Safety Specification on Toy Safety, Section 4.3.5.2.
 

 


STORAGE AND HANDLING

Shelf life: Best if used within six months of date of manufacture. Mix before use for best results. Product is not freeze/thaw stable.

For additional questions, Franklin’s technical service team is available at 1.800.877.4583. 24/7 technical service is available online at www.franklinadhesivesandpolymers.com.

 


IMPORTANT NOTICE TO CUSTOMER:

The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at http://www.franklini.com/Terms_and_Conditions.aspx (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
© Copyright 2022. All rights reserved. Franklin International. Revised 06/09/2022.