Micronax 240-00 is a water-based pressure sensitive adhesive

Micronax 241-01

PRODUCT DESCRIPTION

Micronax 241-01 is a water-based pressure sensitive adhesive that utilizes our proprietary microsphere technology. This ultra-removable, repositionable product offers good quick stick to a wide variety of substrates. Labels coated with Micronax 241-01 can be attached and re-attached repeatedly without loss of its initial quick stick and without ghosting (residual adhesive left behind). Labels can be easily removed from a variety of substrates without marking or damaging the surface.  Even delicate surfaces like newspaper will not be damaged when removing advertisement notes coated with Micronax. Micronax 241-01 can be used for protective masking tapes and paper, wall boarders and graphics, postal labels, retail labels, and other instances where a clean removable or repositionable behavior is needed.The development of performance properties is highly dependent upon the amount of adhesive applied. A typical coating weight of 10-13 g/m2 (6-8 lb/ream) is suggested as a starting point. Micronax 241-01 is designed for direct coating via Mayer rod or gravure methods. Transfer coating may not be appropriate for this technology. AGITATE AT MODERATE SPEED BEFORE USE. Micronax 241-01 is FDA compliant under 21CFR 175.105, 21CFR 176.170 and 21CFR 176.180. 

 
 

PHYSICAL PROPERTIES


 
 

PERFORMANCE PROPERTIES

A 1/2 mil (14g/m2) dry film of Micronax 241-01 cast directly onto 1 mil thickness polyester film will exhibit the following average performance properties when tested on #304 stainless steel, which has a #3 surface finish.
 
 
 
 
 
 
 
 
 
IMPORTANT NOTICE TO CUSTOMER:
The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at
http://www.franklini.com/Terms_and_Conditions.aspx. (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
© Copyright 2016. All rights reserved. Franklin International. Revised 08/31/16.