Micronax 250-00 DEV is a high solids microsphere adhesive

Micronax 250-00

PRODUCT DESCRIPTION

MICRONAX 250-00 can be used “as is” or formulated for a specific coater or application. This product features high solids, binderless spheres that are permanently repositionable, with moderate comparative peel and tack.  Micronax 250-00 is designed for direct coating via Mayer rod, slot-die or gravure methods. TRANSFER COATING MAY NOT BE APPROPRIATE FOR THIS TECHNOLOGY. AGITATE BEFORE USING AT MODERATE SPEED WITH THE APPROPRIATE AIR MIXER.

 

PHYSICAL PROPERTIES

Polymer Type: Acrylic                                                                            
Protective System: Surfactant Stabilized           
Color: White                            
Viscosity (cps): 300 - 1100 (RVF, Spindle #2/20 RPM/77° F)          
Percent Solids (%): 41.0 - 44.0 
pH: 8.0 - 9.5     
Average Sphere Size: 29 μm    
Weight Per Gallon: 8.4
Freeze/Thaw Stability: Unstable
Shelf Life: 6 months
Glass Transition Temperature (Tg):(DSC): -72.5° C      

 

PERFORMANCE PROPERTIES

A 0.5 mil (14g/m2) dry film of MICRONAX 250-00 cast directly onto 1 mil thickness polyester film will exhibit the following average performance properties when tested on #304 stainless steel, which has a #3 surface finish.
 
Test                                                Typical Values             Specification Range
180° Peel Adhesion1                             45 g (0.10 lb)                204 g (0.45 lb) maximum
Loop Tack2                                             91 g (0.20 lb)                453 g (1.00 lb) maximum

 

Minimum Application Temperature:   >32°F                                    N/A
Service (Use) Temperature:            20°F to 250°F                            N/A   


NOTE:  Minimum application and service temperatures are dependent upon many factors including face stock, adhesive coat weight, adhesion, and intended application.  We can only offer an estimate based on the Tg and typical performance properties of the adhesive.

1Franklin International 03QC5002, 30 minute dwell.
2Franklin International 03QC5004, 1 square inch contact, 1 second dwell.


FDA Compliance: 
None
                                                       

 

 

AVERAGE APPLICATION PROPERTIES





IMPORTANT NOTICE TO CUSTOMER:
The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at http://www.franklini.com/Terms_and_Conditions.aspx.
(“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
© Copyright 2022. All rights reserved. Franklin International. Revised 09/14/2022.